Download  Print this page

Acer G196WL Manual

Hide thumbs

Advertisement

TABLE OF CONTENTS

Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................
14
User controls..................................................................................
15
Troubleshooting............................................................................
21

Advertisement

loading

  Related Manuals for Acer G196WL

  Summary of Contents for Acer G196WL

  • Page 1: Table Of Contents

    TABLE OF CONTENTS Special notes on LCD monitors ... 1 Information for your safety and comfort ... 2 Unpacking ... 5 Attaching/Removing the base ... 6 Screen position adjustment ... 6 Connecting the power cord ... 7 Safety precaution ... 7 Cleaning your monitor ...
  • Page 2: Special Notes On Lcd Monitors

    SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
  • Page 3: Information For Your Safety And Comfort

    Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible.
  • Page 4: Product Servicing

    Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •...
  • Page 5: Taking Care Of Your Vision

    Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. ----------------------------------------------------------------------------------------------------- For more information and help in recycling, please visit the following websites: Worldwide: http://www.acer-group.com/public/Sustainability/sustainability01.htm http://www.acer-group.com/public/Sustainability/sustainability04.htm EN-4...
  • Page 6: Unpacking

     LCD Monitor · Audio Cable (Optional)  User Manual G196WL G206HL G226HQL G236HL LCD monitor MU.LUZ00.001  AC Adapter  D-Sub Cable (Optional) ...
  • Page 7: Attaching/Removing The Base

    Attaching/Removing the Base -------------------------------------------------------------------- Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. Attaching the Base SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below.
  • Page 8: Connecting The Power Cord

    CONNECTING THE POWER CORD · Check first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. ·...
  • Page 9: Power Saving

    Power saving The monitor will be driven into Power Savin mode by the control signal power LED. from the display controller, as indicated by the blinking blue State Light Blue Power Saving Blinking Blue Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated.
  • Page 10: Connector Pin Assignment

    CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION Monitor Ground 19-pin Color Display Signal Cable* PIN No. Description TMDS Data2+ TMDS Data2– TMDS Data1 Shield TMDS Data0+ TMDS Data0– TMDS Clock Shield DDC/CEC Ground Hot Plug Detect * only for certain models PIN NO.
  • Page 11 Meaning TMDS Data2- TMDS Data2+ TMDS Data 2/4 Shield DDC Clock DDC Data TMDS Data1- TMDS Data1+ TMDS Data 1/3 Shield * only for certain models 24-Pin Color Display Signal Cable* EN-10 Meaning +5V Power Logic Ground Hot Plug Detect TMDS Data0- TMDS Data0+ TMDS Data 0/5 Shield...
  • Page 12: Standard Timing Table

    Standard Timing Table                     EN-11...
  • Page 13 Standard Timing Table           EN-12...
  • Page 14 Standard Timing Table EN-13...
  • Page 15: Installation

    INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. Connect the digital cable (only for dual-input models).
  • Page 16: User Controls

    Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Empowering: Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. AUTO Auto Adjust: Press this button to activate the Auto Adjustment function.
  • Page 17: Operation Instructions

    Acer eColor Management Operation instructions Step 1: Press “ “ Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “ “ or “ Step 3: Press “ AUTO “ Key to confirm the mode and exit the eColor menu.
  • Page 18: Adjusting The Osd Settings

    Adjusting the OSD settings -------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings.
  • Page 19: Adjusting The Osd Position

    Adjusting the OSD position 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-18...
  • Page 20: Adjusting The Setting

    Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the keys, select the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings. Setting from the OSD.
  • Page 21: Product Information

    Product information 1 Press the MENU key to bring up the OSD. 2 Using the keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-20...
  • Page 22: Troubleshooting

    TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON LED OFF No Picture LED displays blinking blue Unstable Picture Display is missing, center...
  • Page 23 DVI mode Problems Current Status Remedy LED ON LED OFF No Picture LED displays blinking blue · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. · Check the power switch. · Check if AC power cord is properly connected to the monitor.
  • Page 24: Declaration Of Conformity

    Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail:ru_jan@acer.com.tw And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it...
  • Page 25: Federal Communications Commission Declaration Of Conformity

    Fax No.: Acer America Corporation 333 West San Carlos St., San Jose LCD Monitor G196WL; G206H L ;G226HQL;G236HL G196WL xxxxxx ;G206HL xxxxxx G226HQL xxxxxx ;G236HL xxxxxx (“x” = 0~9, a ~ z, A ~ Z or Blank) Acer America Corporation San Jose, CA 95110 U.

This manual is also suitable for:

G226hqlG236hlG206hl