Table of Contents
Advertisement
No
Symptom
3
No Image
4
No Light On
5
Mechanical Noise
6
Line Bar/Line Defect
7
Image Flicker
• Ensure the Signal Cable and Source work
(If you connect multiple sources at the same time, use the
"Source" button on the control panel to switch)
• Ensure all connectors are securely connected and aren't bro-
ken
• Check Main Board
• Check DMD Board
• Check Colour Wheel
• Check DMD Chip
• Check Engine Module
• Ensure all connectors are securely connected and aren't
broken
• Check Lamp Module
• Check Lamp Driver
• Check LVPS
• Check Main Board
• Check Colour Wheel
• Check Fan Module
• Check if the Main Board and the DMD Board are
assembled properly
• Check Main Board
• Check DMD Board
• Check DMD Chip
• Do "Reset (All data)" of the OSD Menu
• Ensure that the signal cables and source are work as well-
Check Lamp Module
• Check Colour Wheel- Check DMD Board
• Check Main Board
Procedure
S1200
Confidential
3-3
Advertisement
Table of Contents
