Samsung WW11BB944DGM User Manual page 41

My Cycles
Add or remove cycles to create a personal cycle list.
1. Tap .
2. Turn the Navigation dial to select My Cycles, and then tap
- You can only edit a cycle to create a personal cycle when the washing machine is not operating.
3. Turn the Navigation dial to select a desired cycle.
4. Tap to add or remove the selected cycle.
- Addition and removal of the course is saved automatically.
5. Once you finish creating My Cycles, tap
NOTE
• The Drum Clean+/Drum Clean cycle cannot be removed from the cycles list.
• You can also edit My Cycles in the SmartThings app.
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing a delay of
between 1 to 24 hours (in 1 hour or 10 minutes increments). The hour displayed indicates the time the wash
will finish.
1. Select a cycle and change the cycle settings as necessary.
2. Tap .
3. Turn the Navigation dial to select Delay End, and then tap
4. Turn the Navigation dial to select the desired time, and then tap
5. Tap and hold .
- Status shows in the display and the washing machine tumbles the drum to sense the weight of the
load (if load sensing is preset for the selected cycle). When load sensing is complete, the display
shows the remaining time until the end of the wash cycle.
- To cancel Delay End, tap
Real-life case
You want to finish a two-hour cycle 3 hours later from now. For this, you add the Delay End option to
the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m. Then, what happens? The
washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m. Provided below is the time line for
this example.
2:00 pm
Set Delay End to 3 hours
Untitled-1 41
to return to the cycles screen.
to restart the washing machine.
3:00 pm
Start
.
.
.
5:00 pm
End
English 41
2022-10-05 12:14:47