Table of Contents
Related Manuals for UltraView HAP-W19
Summary of Contents for UltraView HAP-W19
- Page 1 LCD display solutions User Manual 19” Widescreen High Brightness LCD HAP-W19 Front NEMA4 / IP65 HOP-W19 Universal Mounting Open Frame Designed and manufactured by Austin Hughes UM-UV-621-HW19-Q317V4 www.austin-hughes.com...
- Page 3 Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
-
Page 4: Table Of Contents
Contents < Part. 1 > HAP-W19 Package Content Structure Diagram & Dimension P.2 - 3 Mounting Hardware & Installation P.4 - 5 < Part. 2 > HOP-W19 Package Content Structure Diagram & Dimension P.7 - 8 Mounting Hardware & Installation <... - Page 5 Before Installation W19" High Brightness LCD Display ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.
- Page 6 < Part 1 > < 1.1 > Package Content - HAP-W19 HAP-W19 W19" High Brightness LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack - Mounting bracket x 4 pcs...
-
Page 7: Structure Diagram & Dimension
< 1.2 > Structure Diagram - HAP-W19 W19" High Brightness LCD Display Front view HAP-W19 Rear view Rear case LCD panel Protective 3mm glass 6mm aluminum front bazel Audio speaker ( for HDMI, Audio or TV option ) LCD membrane... -
Page 8: Part. 1 > Hap-W19
< 1.2 > Dimension - HAP-W19 Front View Side View HAP-W19 Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-HW19-Q317V4 www.austin-hughes.com... -
Page 9: Mounting Hardware & Installation
< 1.3 > Panel Mount Installation - HAP-W19 W19" High Brightness LCD Display M4*50mm screw M4*6mm screw Mounting bracket x 8 pcs x 8 pcs x 4 pcs Hardware set part no. UV-BK#2 Steps ■ Install 4 mounting brackets with 8 x M4*6mm screws ■... - Page 10 < 1.3 > VESA mount Installation - HAP-W19 M4 screw VESA mount ( 100*100mm ) ■ Hardware and M4*4 pcs for VESA mount are not provided UM-UV-621-HW19-Q317V4 www.austin-hughes.com...
-
Page 11: Package Content
< Part 2 > < 2.1 > Package Content - OP-W19 W19” High Brightness LCD Display HOP-W19 W19" High Brightness LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Basic I/O Power DVI-D AV2.2D upgrade I/O Audio... -
Page 12: Structure Diagram & Dimension
< 2.2 > Structure Diagram - OP-W19 Front view HOP-W19 Rear case Rear view LCD panel Audio speaker ( for HDMI, Audio or TV option ) Universal open frame mounting LCD membrane Extended remote sensor membrane cable ( 66cm from AD board to sensor end ) Product Dimension Packing Dimension Gross... -
Page 13: Part. 2 > Hop-W19
< 2.2 > Dimension - HOP-W19 W19” High Brightness LCD Display Front View Side View HOP-W19 Rear View UNIT : mm 1mm = 0.03937 inch Bottom View UM-UV-621-HW19-Q317V4 www.austin-hughes.com... - Page 14 < 2.3 > Installation - HOP-W19 ( I ) Universal mount ( II ) VESA mount ( 100*100mm ) M4 screw Hardware and M4*4 pcs for VESA mounting are not provided UM-UV-621-HW19-Q317V4 www.austin-hughes.com...
-
Page 15: Product Specifi Cations
< Part 3 > < 3.1 > Product Specifi cations W19” High Brightness LCD Display Mechanical HAP-W19 HOP-W19 Design Front Panel Black, RAL 9005 Rear Casing Dark grey, RAL 7037 Dark grey, RAL 7037 VESA Mounting 100 x 100mm 100 x 100mm... - Page 16 40,000 ft Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Physical HAP-W19 HOP-W19 Specifi cation Product ( W x D x H ) 508.5 x 65.6 x 338.1 mm 505.5 x 59.6 x 335.1 mm 20 x 2.6 x 13.3 inch 19.9 x 2.3 x 13.2 inch...
-
Page 17: On-Screen Display Operation ( Osd )
< 3.2 > On-screen Display Operation ( OSD ) W19” High Brightness LCD Display Power light Green = On Orange = Power saving Membrane Switch Function Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds) Exit the OSD screen... -
Page 18: Part 4 > Options
< Part 4 > Options < 4.1 > Option Table Options SDI *** HDMI * or DVI-D S-Video * + Composite ( BNC ) Audio Touchscreen MCS multi-display control DC Power MIL-type / lockable connector Quad display TV ( Analog ) * Auto / switch dimming About SDI ( 1 ) The AD board will be upgraded to version 3.0, and this comes standard with HDMI, DVI-D, VGA,... - Page 19 Austin Hughes’ SDI input is an ideal solution for the broadcast- grade video and high resolution CCTV market. Designed for use with UltraView displays, a SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty.
- Page 20 LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters. Designed for use with UltraView LCD displays, Austin Hughes provides a MCS input module without using additional space or power and it comes standard with a 2-year warranty.
- Page 21 < 4.4 > Options : W19” High Brightness LCD Display AV2.2D Upgrade Options AV2.2D Upgrade Options ( DVI-D TMDS single link - DVI-D ( S-Video + Composite, BNC ) - AV ( Built-in Dual Stereo Speakers, 2W x 2 ) - Audio ( 3.5mm audio jacks for audio in &...
- Page 22 < 4.5 > AV3.0 Upgrade Options : ( HDMI 1.3, CEA-861-D - HMDI ( DVI-D TMDS single link - DVI-D ( S-Video + Composite, BNC ) - AV ( Built-in Dual Stereo Speakers, 2W x 2 ) - Audio ( 3.5mm audio jacks for audio in & out ) Audio Power S-Video...
-
Page 23: Projected Capacitive ( 10-Point Touch )
W19” High Brightness LCD Display < 4.6 > Options : Touchscreen & driver W19" USB Touchscreen Specifi cation Multi-touch e-Resistive e-Capacitive Model W19TPC-10 Projected Capacitive 5-Wire Resistive Capacitive Technology Single Single Touch Point Finger or Stylus Finger Input Type 4096 x 4096 2048 x 2048 2048 x 2048 Resolution... - Page 24 Please follow the below steps to setup the touch screen:- Step 1. Run the bundled CD disc or download the driver from the link below : http://www.austin-hughes.com/resources/driver/ultraview Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to fi nish the setup Step 4.
- Page 25 W19” High Brightness LCD Display < 4.7 > Options : DC Power Model 125V 250V Input rating Input voltage: 24-Volt 48-Volt 110-Volt 300-Volt Input range: 18 ~ 36V 36 ~ 75V 66 ~ 160V 180 ~ 425V Input current - No load 50 mA 50 mA 35 mA...
-
Page 26: Mil-Type Or Lockable Connector
< 4.8 > Options : MIL-type or Lockable Connector Input Part no. MIL Standard MS3470W8-33P MIL - DTL - 26482 DC Power MIL - type ( Male ) Connector MS3470W14-15P MIL - DTL - 26482 ( Male ) There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design fl... - Page 27 < 4.9 > Options : Quad Display W19” High Brightness LCD Display QD Specifi cation Item Description Model Number QD (NTSC) QD (PAL) Number of Color 16.7 M 16.7 M Imaging System NTSC Resolution 1024 x 525 1024 x 625 Refresh Rate 1.0 Vpp, 75 Ohm x 4 Camera Input...
-
Page 28: Tv ( Analog )
< 4.10 > Options : TV ( Analog ) Audio Power S-Video HDMI out - in - in Video PC For TV option : ( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and RC-2 remote controller. - Page 29 How to Use RC-2 Remote Controller W19” High Brightness LCD Display INPUT MUTE -/-- FREEZE AUTO MENU SELECT ASPECT SLEEP ENTER BACK EXIT SWAP SOURCE POSITION AUDIO Select the source INPUT Switches on or off the TV Only use in TV mode. Select channels. For channel numbers 10 0 - 9 and above, enter the second digit within two seconds.
- Page 30 < 4.11 > Options : Auto Dimming DA-01 Light sensor on OP model DA-01 Light sensor on AP model ( 66cm from AD board to sensor end ) DA-01 light sensor installed on the display front panel. Users can set auto dimming ON or OFF from OSD menu.
- Page 32 The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2017 Austin Hughes Electronics Ltd. All rights reserved. UM-UV-621-HW19-Q317V4 www.austin-hughes.com...