Advertisement
RX-FT570
Procedure
2 = 12
1. Lift up the battery terminal from the stopper in
the direction of arrow @ and follow by @.
2. Pull out the battery an in the direction of
arrow @).
3. Push in the claw in the direction of arrow @.
4, Pull out the battery terminal from the front side
of the cabinet in the direction of arrow ©.
HM DIAL CHASSIS ASSEMBLY
1. Install the tuning knob to the dial chassis in the
|
ree.
ee
direction of arrow ©.
2. Install the pointer in the direction arrow @, then insert it
into the guide in the direction of arrow @.
Dial Chassis
Tuning Knob
Pointer
Dial chassis
Pointer
Zero Point
3. Turn the tuning knob in the direction of arrow ©
to the zero point.
Tuning Knob
?@
_ Dial eer
BA gue
ee aN
ble STEM O |
4. Turn the tuning gear fully in the direction of arrow ©.
5. Install the dial chassis in the cabinet and then replace 2 screws.
=,
Advertisement
