Advertisement
mi CAUTION FOR AC MAINS LEAD
[For [EB] area.]
For your safety, please read the following text
carefully.
|
|
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark@> or the BSI mark on
the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.
3
If you lose the fuse cover, the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
CAUTION
!
|
IF THE
FITTED
MOULDED
PLUG
IS UN-
SUITABLE
FOR THE
SOCKET
OUTLET
IN
YOUR HOME THEN THE FUSE SHOULD BE
REMOVED AND THE PLUG CUT OFF AND -
DISPOSED
OFF SAFELY.
THERE
IS A DANGER
OF SEVERE
ELEC-
TRICAL SHOCK
IF THE CUT OFF PLUG IS
INSERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted, please observe the
wiring code as shown below.
lf in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this lead are coloured in accordance
with the following code:
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this
_
PX-FT570
The wire which is coloured BLUE must be connec&d
to the terminal in the plug which is marked with he
letter N or coloured BLACK.
The wire which is coloured BROWN must be co? n-
nected to the terminal in the plug which is marked with
the letter L or coloured RED.
Under
no circumstances
should
either or these
wires be connetced to the earth terminal of the
three pin plug, marked with the letter E or the Earth
symbol +.
.
appliance may not correspond with the coloured
—
markings identifying the terminals in your plug,
proceed as follows:
|
Before use
Remove the connector cover as follows.
Connector
cover
How to replace the fuse
1. Remove the fuse cover with a screwdriver.
Fuse cover
Advertisement
