Advertisement
Acljusling ttie LCD DisplaJ
The RCP-730/731 is provided with LCD-display
adjustment mode, which permits you to adjust the
brightness and contrast of the LCD display of the paint
control block.
To enter LCD-display adjustment mode
While holding down the LOCK and PARA buttons,
press the WHITE button of the paint item select
buttons.
The LCD display shows the following:
To adjust the LCD display
Tum the paint controls (rotary encoders). You can
adjust the brightness with the left control and the
contrast with the right control.
To release LCD-display adjustment mode
Press the LOCK and PARA buttons simultaneously.
1¢Stl
The values set in LCD-display adjustment mode are
stored in memory when the modes are canceled. Be
sure to release the modes before turning off the power.
14 (E)
Specilicalians
General
Power requirements 10 to 30 V
Power consumption 4 W max.
Maximum cable length
200 rn (656 feet)
Operating temperature
°
0
C to 45
Dimensions
102 x 332 x 67 mm (w/h/d)
(4
/s x 13
1
including projecting parts and
controls
RCP-730: 1.8 kg ( 4 lb)
Mass
RCP-731: 1.9 kg (4 lb 3 oz)
Inputs/outputs
REMOTE
CCU/CNU
8-pin multiconnector ( 1)
AUX
8-pin multiconnector (1)
PREVIEW
6-pin (1)
Supplied accessories
6-pin plug for preview ( 1)
Operation Manual ( 1)
Maintenance Manual ( 1)
Design and specifications are subject to change
without notice.
DC
°
°
C (32
°
F to l 13
F)
/s x 2
/4 inches)
1
3
Advertisement
