Advertisement
Location and Function of Parts
Iris/master black control block (RCP-730)
0
f-number display---+----�
f)
RELATIVE button __ ,...___.__
e
--------i+-,.
IRIS indicator
0
f-number display
Displays the f number of the current iris setting. When
the iris is closed, "CL" is displayed.
f) RELATIVE (iris relative) button
When the IRIS/MB ACTIVE button is lit, the iris
adjustment mode can be selected with this button.
Press and light up the button for Relative mode or
press so that it goes dark for Absolute mode.
When the IRIS/MB ACTIVE button is not lit, Relative
mode is automatically selected and this button is not
operative.
Q IRIS indicator
The corresponding LED lights according to the iris
setting. When the RELATIVE button is not lit, here
also the upper and lower limits of the manual
adjustment are displayed at a low luminous level.
0
CLOSE (iris close) button
Press and light the button to close the iris.
10 (E)
CLOSE button
AUTO button
EXT indicator
00000000
[!][!]
00000000
00000000
00000000
00000000
00000000
CLOSE
AUTO
00000000
00000000
RELATIVE
2.0
2.8
ill)
4.0
5.6
8.0
11
16
22
IRIS
---------G
0
Press and light the button to automatically adjust the
iris according to the amount of input light.
If you press the button when lit, it goes dark and
manual iris adjustment is enabled.
0
Lights when the lens extender is used.
0
Press and light up this button to enable the iris/master
black control block of the panel.
When the PANEL ACTIVE button is pressed, this
button also lights.
Ci) SENS (sensitivity) control knob
Used for manual iris adjustment in Absolute mode.
This control is not operative when Relative mode is
selected.
See the table "Iris adjustment functions" on the next page.
IRIS/MB ACTIVE button
SENS control knob
' COARSE control knob
□
IRIS control lever/preview switch
AUTO button
EXT (lens extender) indicator
IRIS/MB ACTIVE (iris/master black active)
button
_.;I
Advertisement
