Advertisement
G
(
AUTO SETUP block
®
Auto adjustment item select buttons
Press and light up these buttons to select the items to
be automatically adjusted.
SKIN DTL AUTO HUE: Skin tone detail automatic
hue
LEVEL: Gamma balance, knee point, master black
level, etc.
@START/BREAK button
Press to start automatic adjustment of the selected
items.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press the button when lit, the automatic
adjustment is canceled and the button flashes. To stop
1
the flashing, press the button again.
©
WHITE ( white balance) button
Press to automatically adjust the white balance.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press this button when lit or the START/
BREAK button, the automatic adjustment is canceled
and the button flashes. To stop the flashing, press the
,,.,-
1
button again.
@BLACK (black balance) button
Press to automatically adjust the black balance and
black set.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press this button when lit or the ST ART/
BREAK button, the automatic adjustment is canceled
and the button flashes. To stop the flashing, press the
button again.
IHMI
If an error occurs during adjustment, the pressed
(
button flashes.
CD
MASTER GAIN buttons and display window
Select the appropriate video gain according to the
illumination of the subject to be shot. The selected
value (dB) is displayed in the window.
The gain value increases when the .A (up) button is
pressed and decreases when the T (down) button is
pressed. It continuously changes when either button is
kept pressed.
4D
Scene file control block
®
SCENE (scene file number) display window
The file number selected with the scene file select
buttons are displayed.
@ RECALL button
To recall a scene file, first specify the number of the
desired file with the scene file select buttons, then
press this button.
When the specified file is correctly recalled, the
RECALL button lights.
©
Scene file select buttons
Press the .A (up) or T (down) button to select the
desired scene file.
When you press both the .A. and T buttons
simultaneously, the current file number is displayed.
@ STORE button
To store the current settings in a scene file, first select
the desired file number with the scene file select
buttons, then press this button.
7 /I=\
Advertisement
