Advertisement
i
Temperature controller Evco
Operating
The temperature controller shows the current temperature (actual value) in display mode. If no
button is pressed for 20 seconds during setup (setup mode), the temperature controller returns
to display mode.
Turning on/off
set
- Press and hold
for 4 seconds.
The temperature controller is turned on or off.
Locking/unlocking the buttons.
No processes should be currently running on the temperature controllers.
set
- Press and hold
and
Loc will be shown on the display for 1 second. The buttons are now locked.
set
- Press and hold
and
UnL will be shown on the display for 1 second. The buttons are now unlocked.
Displaying the set point
set
- Briefly press
: SEt and the set point appear.
- Wait 20 seconds: The current value is displayed.
Changing the set point
set
- Briefly press
: SEt and the set point appear.
- Select the menu item using
- Set the desired set point temperature using
set
- Confirm with
.
Changing from Celsius to Fahrenheit
set
- Briefly press
: SEt will appear.
- Press
or
until Uni appears on the display.
- Select the menu item using
- Change the units from 0=°C to 1=°F using
set
- Confirm with
.
Correcting the actual value
set
- Briefly press
: SEt will appear.
- Press
or
until OFt appears on the display.
- Select the menu item using
- Correct the actual value using
set
- Confirm with
.
set
Start/stop/confirm button
Increase value
Decrease value
simultaneously for 2 seconds.
simultaneously for 2 seconds.
set
.
set
.
set
.
.
en
.
.
Status:
07/2013
3
Advertisement
