JVC TK-1280E Service Manual page 31

| TK-1280E/-1180E/-1281EG
MIDISASSEMBLY PROCEDURE
¢ Be sure to turn OFF power before disassembly of parts.
1. Removal of Casing Parts
1—1 Removing the rear cover 1-4 Removing the front die casting
(1) Remove the two screws (A) shown in Figure 1. (1) Remove the C mount adapter.
(2) Remove the four screws ©)in Figure 1.
1-2 Removing the tripod base 1—5 Removing the side cover
(1) Remove the three screws (B) in Figure 1. (1) Remove the two screws (E) in Figure 1.
* You may remove the aluminum case without
1—3 Removing the aluminum case removing the side cover.
(1) Remove the screw(C)in Figure 1.
(2) Pull out the case in following the arrow.
Rear cover
Aluminum case
Front die casting
Side cover
Tripod base
C mount adapter
|
|
1
Figure 1 removing the casing perts
(No, 6647) 5