Advertisement
MPEG2 sound
You can enjoy motion picture and tive concert DVD video discs with dynamic realistic sound by connecting an amplifier
equipped with an MPEG2 audio decoder or MPEG2 audio processor.
_4_
Amplifier equipped with a_n
MPEG2 audio decoder
I
To COAXtAt
type digital
audio input
5 £_ coaxial cable (not supplied)
O
o
¢#
o
¢#
÷
2 channel
digital
stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting
an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
Notes:
Amplifier equipped with a_
Digital audio input
/
I 7
I
To COAXIA_
type digital l
audio input _a75
£_ coaxial cable (not supplied)
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use onty and is incompatible
with the COAXIAL
DIGITAL AUDtO
OUT jack of the TV/DVD.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL"
input of a Receiver or Processor.
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the TV/DVD to other equipment,
be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise,
the speakers
may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect
the TV/DVD*s power cord. tf you leave the amplifier
power on, the
speakers may be damaged.
÷
17
5K70101B
[E] (P13-23)
17
_
20/4/04,
15:52
Advertisement
