Toshiba MD20FP1 Owner's Manual page 13

connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system, if
you are using a cabte TV service (CABLE), see page 14 for CabIe TV connections.
Antenna Antenna
jack jack
75 ohm coaxial cabte
(not supplied)
300-75 ohm matching
transformer (supplied)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna iack,
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
o
o
¢#
o
¢#
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin4ead wires
Antenna
jack 300-75 ohm matching
transformer (supplied)
t%3e 0O V F-,3e0a0 2
(not supplied) (not supplied)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300°75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.
Antenna
iack
twin-lead wire
(not supplied)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin°lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
13
5K70101S [E] (P13-23) 13 20/4/04, 15:52