Panasonic Digital Palmcorder PalmSight PV-DV600 Operating Instructions Manual page 16

Color Enhancement Light
Before you begin...
* Connect the Palmcorder to a power source
(pages 12, 13).
¢ Set POWER to CAMERA.
To brighten the natural colors in a scene.
> Built-in Light Mount
1 Slide Light into the Built-in Light
Mount.
Be sure it locks into place.
TTT)
2 Press LIGHT ON.
3 Press LIGHT again to OFF.
LIGHT RELEASE LIGHT Button
Button
To remove the Light:
Press LIGHT RELEASE and slide the Light
out of the mount.
Caution:
This light becomes hot during operation.
Make sure nothing covers the Light during
operation.
* Using the fight will reduce battery operating time.
* |f using the enhancement Light for an extended period of time, be sure to provide
ventilation when using it in a hot environment.
* Be sure LIGHT is set to OFF when not in use.
* Do not attempt to lift or carry the Palmcorder by holding the Enhancement Light.
* If tight bulb needs to be replaced, take Light to your nearest authorized service center.