Table of Contents
Advertisement
5. USE OF STEP
The step should be tested after installation. To do this, follow the instructions
1.
Visual inspection
Check that all screws are in the intended places and
2.
Function
Extend and retract the stage several times. Check whether there are any unusual noises or
irregular
movements.
3.
For any concerns, please contact our customer service. Contact details can be found in the last
chapter.
6.
CARE/MAINTENANCE
If the step functions poorly or no longer due to dirt or frost, all hinges must be cleaned or thawed. The
moving parts are in maintenance-free plain bearings. Do NOT grease components.
The step must be cleaned as part of the normal cleaning cycle of the vehicle. This depends on the use of the
vehicle and the degree of soiling caused by operation. Normal, mild cleaning agents should be used, just as
for cleaning the other parts of the vehicle. The use of high-pressure cleaners is not recommended. Do not use
aggressive solvents. These could damage the paint and glue used in the manufacture of the
7.
DISPOSAL
Only have the disposal of the door-combined step carried out by qualified specialists after the period of use.
The manufacturer accepts no liability for damage caused by improper execution of disposal.
8. CUSTOMER SERVICE
The customer service of LEGEND Fleet Solutions is at your disposal for ordering spare parts,
for maintenance and repair work and for problems and
The address is:
LEGEND Fleet Solutions
56957 Hwy 3 West, Tillsonburg,
ON, N4G 4G8 Canada
Tel: 519.688.1043
Email: info@legendfleet.com
www.legendsoftheroad.com
X3 series | door-combined step for
mounting under the vehicle floor
below:
tightened.
questions.
LEGEND FLEET SOLUTIONS
step.
18 | 18
Advertisement
Table of Contents
