Table of Contents
Advertisement
4. INSTALLATION
4.1 MOUNTING
ON CAR BODY
Mount the door-combined step to the vehicle body using the supplied mounting kit (see chapter 2.3.4
"Overview of mounting kit MB Sprinter"). Align the step as shown in Figure 6 horizontally and parallel
to the vehicle using a jack and secure it to the vehicle with suitable tools (gripping pliers and screw clamp) to
prevent it from falling down.
Overview body with X3 step
Align the step under the vehicle and secure it against accidental tipping or falling!
The step must be aligned parallel to the vehicle.
X3 series | door-combined step for
mounting under the vehicle floor
LEGEND FLEET SOLUTIONS
10 | 18
Advertisement
Table of Contents
