Download Print this page

Technics SL-220 Operating Instructions Manual page 19

Frequency generator servo automatic turntable system
Hide thumbs Also See for SL-220:

Advertisement

Tonearm
section
Type:
Effective length:
Overhang:
Friction:
Effective mass:
Tracking error angle:
Offset angle:
Adjustable stylus
pressure range:
Cartridge weight range:
Headshell welght:
Universal
tubular arm, static-
balanced type
230 mm
(9-1/16")
15 mm
(19/32")
Within 7 mg (horizontally and
vertically)
13 g (without cartridge)
Within 2° 32' (at the outer groove
of 30 cm (12") record)
Within 0°32' (at the inner groove of
30 cm (12") record
22°
0 to 3 g (stylus pressure direct
reading type)
5.5 to 85g
14.5 to 17.5 g (including head-
shell)
99
S10—
Model No.:
Type:
Frequency response:
Output voltage:
Channel separation:
Channel balance:
Compliance (dynamic):
Stylus pressure:
Load impedance:
Weight:
Replacement stylus:
EPC-270C
Moving magnet
20 Hz to 25 kHz -3 dB
20 Hz to 15 kHz +2 dB
3.2 mV at 1 kHz
5 cm/sec. zero to peak lateral
velocity
(6.4 mV at 1 kHz, 10 cm/sec. zero to
peak lateral velocity [DIN 45500))
25 dB at 1kHz
Within 2 dB at 1 kHz
10 X 10-6 cm/dyne at 100 Hz
(CBS STR-100)
1.75 40.25 g (17.5 +2.5mN
47 kQ to 100 kQ
6.0 g (cartridge only)
EPS-270SD
Specifications subject to change without notice.

Advertisement

loading

This manual is also suitable for:

Sl-221