Table of Contents
Advertisement
FDSteX
PD-4 DIGITAL AUDIO RECORDER
Tape compartment controls
Figure 2
Tape compartment controls
1)
Cover-open lever
The protective cover will open when this knurled lever is slid sideways to the right.
2)
EJECT/UNLOAD key
The tape is unloaded when this key is pressed once. When the tape is unloaded, the
hard brake (reel lock) is applied. The STOP LED (15) flashes during the unload
operation.
The tape is ejected when this key is pressed a second time.
This key is only effective in STOP and PAUSE modes.
3)
INPUT switch
This switch selects ANA (analog) or DIG! (digital) audio input. The operation is executed
only when the PD-4 is in STOP mode.
Note:
The time code generator may produce incorrect timing data when you switch between
the analog and digital settings. This is because the master clock is also switched.
4)
Fs(kHz) switch
This switch selects the sampling frequency. The PD-4 can be switched between three
sample rates: 48 kHz, 44.1 kHz, and 48.048 kHz.
8
Controls 8c Connections
Advertisement
Table of Contents
