Downloading - Pace MSS100 Series Service Manual

DOWNLOADING
You use this feature to "program" another receiver of
the same type. During the download, all of the infor-
mation stored in the first receiver's internal memory is
transferred to the second receiver. This includes all the
settings which you have made and stored at the menus,
except the clock setting and any timers you have set up.
Note
When downloading, you must follow the on-screen
instructions exactly, otherwise errors may occur.
With a satellite TV picture displayed from the receiver
you are downloading from:
)> At the receiver you are downloading from, press
MENU, 6, 5, to display the Download Menu.
)») Turn off the power to the receiver you want to
download to.
>)» Connect a SCART lead between the VCR SCART
connector on the rear panel of each receiver.
> Press STORE.
Note
The number on the screen is the software version
number.
»» Turn on the power to the receiver you want to
download to.
Note
Up to this stage, you can stop the download by
pressing the NORM key. If you continue beyond this
step, you cannot stop the download.
> Press STORE.
During download "global" information is transferred
first, then all the programme information. Messages
appear on the screen to tell you which programme is
currently being transferred. Download takes about 15
seconds.
»> When the message "Download Complete" appears,
disconnect the receiver you have downloaded to.
Press STORE to return to the Installation Menu if
you wish to download to another receiver,
otherwise press NORM to return to a satellite
programme.
If the download fails for any reason, the message
"Download Error" appears.
RI TTING THE PIN
The factory-set PIN is 1234.
If you have a PIN and do not know what it is, you can
reset the PIN to its factory value as follows:
At the wall socket, disconnect the receiver from the
mains supply. Hold down the © button on the top
cover while you reconnect the receiver at the wall
socket. You need to hold down the © button for several
seconds.
When the PIN is reset, the following also occur: any
locked programmes or menus become unlocked and the
clock and any timers set up are no longer set.
Download
11 Power OFF the receiver to
be programmed
2 Connect a Scart lead
between the VCR Scart
'on each receiver
Press STORE to continue or
NORM to exit.
Download
Power ON the receiver to
be programmed
00000000
Download
Ready to download
Press STORE to continue or
NORM to exit.
Download
Downloading Prog.
Download
'Download Complete
Press STORE to continue
'or NORM to exit.
Download
Download Error
Press STORE to continue
'or NORM to exit.
MSS 100 Series Satellite Receiver