Page 1
For a full explanation of all features and instructions, please refer to the User’s Guide (available for download from support.hubbleconnected.com). 1. Contents Inside Box Models: Skyvision AI Pro Skyvision AI Pro Twin Baby Unit * Parent Unit Power Adapters * Quick Start Guide...
Page 2
2. Setting up your Digital Video Baby Monitor 2.1 Connecting the Power Supply for the Baby Unit • Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit. • Connect the other end of the power adapter to a suitable electrical outlet.
Page 3
2.3 Connecting the Power Supply of the Parent Unit. • Connect the USB Type-C plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed adapter (5V DC / 1500mA). •...
Reset pin hole Press and hold with a small pin to reset the unit. Baby Unit Press and hold to pair with the parent unit or for Hubble PAIR button ® Wi-Fi Setup. Located on the side of the camera.
Page 5
Menu Icons Tap to access Hubble Baby entertaining games and videos. LCD Brightness Level Control (8 Levels). Zoom Level Control. Audio Media selection - Personal Recordings , Lullabies/Soothing Sounds , Audio Books , Volume control of media playback Tap to turn flashlight on or off.
* The playlist appears only if you make the audio recording via Hubble app. Audio Media Playback menu icons Tap to display personal recording playlist. Tap to display soothing sound or lullaby playlist. Tap to display audio book playlist. Volume control of media playback.
Page 7
Viewing Devices 1. Open the HubbleClub by Hubble Connected App on your compatible smartphone or tablet. 2. Follow the in-app instructions to create your Hubble account and connect to your device. Please take note of the following minimum system requirements: Smartphones/Tablets: iOS 13.0, Android™...
Page 8
8. Installation of Crib mount Ensure the finest viewing experience with the included crib mount featuring a cable management system. This mount is designed to attach directly to most crib top rails. Follow these instructions to assemble and install the crib mount. 8.1 Assembling the Crib Mount 8.1.1 Lower Tube Assembly •...
Page 9
8.1.3 Middle Tube Assembly • Thread the power cord through the middle tube. • Insert the middle tube into the lower tube connector until a "Click" sound confirms the connection. Refer to Fig. 5. • Thread the power cord through the connector and insert it into the upper end of the middle tube, securing with a "Click"...
Page 10
Fig. 8 Fig. 7 Fig. 9 8.1.5 Locking the Lid • Place the tab end into the lower open section of the elbow. • Rotate the lid down into the elbow tube, pressing until you hear a "Click" to ensure a secure fit. Refer to Fig.
Page 11
Fig. 12 Fig. 13 8.1.7 Power Connection • Insert the DC plug into the camera's power socket. Refer to Fig. 14 & Fig. 15. • Any excess cable should be pushed back into the open slot. Fig. 14 Fig. 15 8.2 Mounting the Crib Mount •...
Page 12
8.2.1 Powering On • Insert the DC plug into the power socket at the bottom of the crib mount. Refer to Fig. 18. • Connect the power adaptor to a suitable power outlet. Fig. 18 Fig. 19 8.2.2 Cable Management Covers •...
Limited ("HUBBLE"). What Does this Limited Warranty Cover? Subject to the items listed below in the section “What is not Covered” HUBBLE warrants that this Hubble connected branded product (“Product”) will be free from defects in material and workmanship under normal use for a period of 1 year from the date of purchase and that any certified accessory (“Accessory”)
• Damage caused by or resulting from contact with foreign substances, including, but not limited, to liquid, water, rain, humidity, perspiration, sand, dirt, and/or food; • Damage caused by or resulting from the use of Non-Hubble Smart Nursery branded or certified Products or Accessories or other peripheral equipment;...
What will HUBBLE do? HUBBLE or its authorized distributor at its sole discretion will, at no charge, repair or replace any Products or Accessories that do not conform to this Warranty. In the event that replacement is necessary to remedy a defect in material or workmanship, HUBBLE may use new or remanufactured products, accessories or parts of equal quality to the original Product or Accessory.
Page 16
HUBBLE or representations made by any agent, employee or staff of HUBBLE, that may have been made in connection with your purchase of any Product and/or Accessory. FCC and IC regulations (FCC Part 15) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
Need help?
Do you have a question about the Skyvision AI Pro and is the answer not in the manual?
Questions and answers