Discs-Basic Play.13 - Panasonic SC-DT300 Operating Instructions Manual

Discs—Basic play
1 6
2
ii
5
6
i.vj.wi i»vj.yipraivcpi
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the unit.
1 Press [SYSTEM(!)] to turn on the unit.
2 Press [DVD/CD] to select "DVD" as
the source.
• Main unit: Press [SELECT].
Each time you press the button:
DVD—>TV<AUX>—»VCR<EXT>-»FM—»AM
t_I
For progressive output:
Press [SHIFT]+[PROGRESSIVE] so the "PROGRESSIVE"
indicator lights.
NOTE
This unit does not output video signals from the
VIDEO OUT and S-VIDEO OUT terminals when the
"PROGRESSIVE" indicator is on.
3 Press [±] to open the disc tray.
4 Place the disc on the disc tray.
Press again [A] to close and start play.
5
Label must face upward.
(With double-sided discs, load so the
label for the side you want to play is
facing up.)
If play doesn't start after step 4
Press [►] (PLAY).
6 Adjust the volume.
■ When "D.MIX" is flashing (■» page 25)
■ To stop play
Press (■] (• page 14, Resume function).
■ To pause play
Press [II] during play.
Press [►] (PLAY) to restart play.
• If "®" appears on the television
The operation is prohibited by the unit or disc.
•The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [■] when you finish to preserve
the unit's motor and your television screen.
•Volume may be lower when playing DVDs than when playing other
discs or during television broadcasts.
If you turn the volume up, be sure to reduce the volume again be¬
fore playing other sources so that a sudden increase in output
does not occur.
13
RQT6534