Step 3 Television And Flat Cable - Panasonic SC-DT300 Operating Instructions Manual

10
Simple setup
Television and flat cable
DT300
m
Connect directly to your television.
Do not connect the unit through a video cassette recorder, because the picture may not be played correctly due to the copy guard.
For better images
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more
vivid picture than the VIDEO OUT terminal by
separating the chrominance (C) and lumi¬
nance (Y) signals before transmitting them to
the television.
(Actual results depend on the television.)
Television
"-N
f
-'
-□ fa=&=SH 0-
S-VIDEO
S video cable
S VIDEO
OUT
S->
(not included)
IN
For better images
m*nni
COMPONENT VIDEO OUT terminal (see below)
These terminals can be used for either interlace or progressive output and provide a
purer picture than the S-VIDEO OUT terminal.
Connection using these terminals outputs the color difference signals
(Pb/Pr)
and
luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.
Television
eO>=
<Q>=
o>
=cO
°cfll k
=<E>
COMPONENT
VIDEO OUT
(480P/480I)
Video cable
(not included)
IdftTifil
COMPONENT VIDEO OUT terminal
•The description of the component video input terminals de¬
pends on the television or monitor (e.g.
Y/Pb/Pr,
Y/B-Y/R-Y,
Y/Cb/Cr).
Connect to terminals of the same color.
• After making this connection, change the black level for a better
picture
(•»
page 28, Video—Black Level Control).
To enjoy progressive video
1. Connect to the component video (480p) input terminals on a
television compatible with this unit's copy guard system.
2. Press [SHIFT3+{PROGRESSIVE] on the remote control so
the "PROGRESSIVE" indicator lights (• page 13).
NOTE
This unit does not output video signals from the
VIDEO OUT and S-VIDEO OUT terminals when the
"PROGRESSIVE" indicator is on.
•The screen may shift off center when using progressive output.
Adjust the position of the screen if this occurs (** page 21,
Video menu—Horizontal position).
•Video will not be displayed correctly if you connect to a televi¬
sion that is incompatible with this unit's copy guard system.
For your reference
All televisions manufactured by Panasonic and that have 480p
input terminals are compatible. Consult the manufacturer if you
have another brand of television.
RQT6534