Table of Contents
Advertisement
Installation
Pump Harness Extension
NOTE: Reference Wiring Diagram on page 27 for this
section.
1. Remove the hand rail mounting bolts. Install the lad-
der brackets under the bolt heads for tying off the
cable and hoses.
F
. 33
IG
2. Connect the Compact Dyna-Star pump cable to the
Compact Dyna-Star (F
3. Connect the Compact Dyna-Star extension harness
to the Compact Dyna-Star pump cable (F
F
. 34
IG
4. Route the Compact Dyna-Star extension harness to
the hand rail, and down to the ladder brackets near
the toe board.
18
. 34).
IG
. 34).
IG
NOTE: Photographs may include optional equipment.
5. Route the extension cable toward the front of the
vehicle (F
. 35).
IG
F
. 35
IG
6. Route the extension cable through the deck pass
and the grommet located in the right front corner of
the decking (F
. 36).
IG
F
. 36
IG
3A7633A
Advertisement
Table of Contents
