Cleaning And Maintenance; Troubleshooting - Dometic Performance Booster ACC3100D Service Kit Instructions

6. Attach the hose to the sensor.


10 Cleaning and maintenance

NOTICE! Damage hazard
• Do not use sharp or hard objects or cleaning agents for cleaning as these may damage the sensor.
• Never insert the device into water.
• Occasionally clean the differential pressure sensor with a so, damp cloth.
• Regularly check live cables or lines for insulation faults, breaks or loose connections.
• Regularly check the hose for breaks.
• Regularly check if the hose is free of dust. If necessary, blow through the hose to clean it.

11 Troubleshooting

Problem
Sensor LED does not flash after power
up.
Possible cause
No power supply.
Suggested remedy
Sensor with battery only:
Check if the battery is not dis-
charged. If necessary, replace
the battery.
Sensor without battery only:
Check if the Sensor is properly
connected to the power supply.
EN
17