Samsung WD8 T4 Series User Manual page 228

Installation
STEP 4 Connect the water hose
The provided water hose may differ depending on the model. Please follow the instruction
according to the provided water hose.
Connecting to a threaded water tap
WARNING
If there is a water leak, stop operating the washing machine and disconnect from the
electrical supply. Then, contact a local Samsung service centre in case of a leak from the
water hose, or contact a plumbing technician in case of a leak from the water tap. Otherwise,
this may cause electric shock.
24 English
WD70T4046EE_04200D-02_EN(Indicative).indd 24
1. Connect the water hose to the water tap,
and then turn the connector clockwise as
shown.
2. Connect the other end of the water
hose to the inlet valve on the back of
the washing machine. Turn the hose
clockwise to tighten.
3. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
2021/2/25 14:24:40