Advertisement
Available languages
Available languages
B
Product usage
Connecting the appliance
After installing the appliance, connect the power plug into a socket outlet.
Note:
After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours
before you put food into the appliance. If you add food before the appliance has
cooled completely, your food may spoil.
Tips for energy saving
•
Do not place the appliance near cookers, radiators or other heat sources. If the ambient
temperature is high, the compressor will run more frequently and for longer, resulting
in increased energy consumption.
•
Ensure that there is sufficient ventilation at the base of the appliance, on the sides of the
appliance and at the back of the appliance. Never cover ventilation openings.
•
Please also observe the spacing dimensions in the chapter „Installation".
•
The arrangement of drawers, shelves and racks as shown in the illustration offers the most
efficient use of energy and should therefore be retained as far as possible. All drawers and
shelves should remain in the appliance to keep the temperature stable and save energy.
•
To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the middle
drawers can be removed. The top and bottom drawers and shelves should be removed
last if necessary.
•
An evenly filled refrigerator/freezer compartment contributes to optimal energy use.
Therefore, avoid empty or half-empty compartments.
•
Allow warm food to cool before placing it in the refrigerator/freezer. Food that has already
cooled down increases energy efficiency.
•
Allow frozen food to defrost in the refrigerator. The coldness of the frozen food reduces
the energy consumption in the refrigerator compartment and thus increases the energy
efficiency.
•
Open the door only as briefly as necessary to minimize cold loss. Opening the door briefly
and closing it properly reduces energy consumption.
•
The door seals of your appliance must be perfectly intact so that the doors close properly
and energy consumption is not increased unnecessarily.
8
EN
Advertisement
