Table of Contents
Advertisement
Hooking up
ey
Connect your camcorder to play back the tape you want
to print from. Then, connect a TV so that you can monitor
the pictures to be printed.
Connect the printer's INPUT:
VIDEO to the camcorder's VIDEO
output jack, using a video cable
(not supplied).
INPUT
Ceheitths
S¥IDEO VIDEO
@LANC cable (not supplied)
Video
cable (not
S video cable (not supplied)
supplied)
2 a ea
Tht
¢
=< :Signal flow
if your camcorder has an S VIDEO output
connector
Connect the printer's INPUT: S VIDEO to the
camcorder's S VIDEO output connector, using the S
VIDEO cable (not supplied). This connection
results in better print quality.
If you use both S VIDEO connector and VIDEO jack
simultaneously, the printer automatically selects
the S VIDEO input as the input video signal.
if your camcorder has a @LANC jack
Connect the printer's @LANC to the camcorder's
@LANC jack, using the @LANC cable (not
supplied). The printer automatically stops the
camcorder when you select the picture on the
printer.
Note that the @LANC jack on this printer does not
correspond to CONTROL L or REMOTE jacks.
6
Getting Started
Connect the printer's MONITOR
OUT to the TV's VIDEO input jack,
using the supplied video cable.
INPUT
S¥IDEO WADEO
OO
C3
Video cable (supplied)
,
:
VIDEO
== :Signal flow
Connect the supplied AC power
cord to AC IN of the printer and a
wall outlet.
Toawalloutlet
«© SY
You cannot use a television with an antenna input only.
Advertisement
Table of Contents
