Troubleshooting - Bosch WGG256Z0ES User Manual And Installation Instructions

Table of Contents

Advertisement

en Troubleshooting

Troubleshooting

17 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Never make any technical modifications to the appliance or its features.
Repairs to the appliance should only be carried out by trained specialist
staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The display goes out
and
⁠   Inicio/Pausa +
Carga flashes.
"E:30 / -80"
38
Cause and troubleshooting
Energy-saving mode is active
Press any button.
a The display lights up again.
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
Ensure that the drain pipe and water drain hose are
not kinked or trapped.
The water outlet hose is connected too high.
Install the water outlet hose at a maximum height of
1 metre.
Unapproved extension installed on the water drain
hose.
Remove any unapproved extensions from the water
hose.
→ "Connecting the appliance", Page 14
Drain pump is blocked.
Clean the drain pump. → Page 35
Pump cover is not correctly assembled.
Correctly assemble the pump cover.
The pump cap is not fully screwed in.
Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap
must be in a vertical position.
Detergent dosage is too high.

Advertisement

Table of Contents
loading

Table of Contents