Video Tape Editing; Adding New Sound To A Video Tape During Video Editing - Sony STR-D2020 Operating Instructions Manual

Fim stereo/fm-am receiver
Table of Contents

Advertisement

MV UTe (=Yomm at=rexe)cellare,
Video Tape Editing
Preparation
Adding New Sound to a Video Tape during
Video Editing
If the AUDIO indicator is lit in the display window,
During video tape editing, you can add the desired
press the EDIT AUDIO button to make the indicator go
sound on the recording-side video tape from various
off.
audio program sources.
To VIDEO 1
VIDEO OUT
1 Press EDIT VIDEO to select the playback-side
VCR.
2 > 10r3
& 1 appears in the VIDEO EDIT dis-
play area.
2 > 1: for VCR 2
3 >
1: for VCR 3
2 Press VIDEO 2/LD or VIDEO 3 to select the video
signal to monitor on the monitor TV.
VIDEO 2/LD: for VCR 2
VIDEO 3: for VCR 3
|
3 Set the playback-side VCR to the playback =|
4 Set VCR 1 to the recoridng mode.
Editing will begin.
To switch the playback-side VCR during editing
Press EDIT VIDEO. Each time you press the button, the
playback-side VCR switches from VCR 2 or 3 to VCR 3 or 2.
To view the other video source(s) on the monitor TV during
editing
Press the appropriate FUNCTION
selector, VIDEO 1, VIDEO
2/LD, or VIDEO 3.
Listening to an audio program during video tape editing
1
Press the appropriate FUNCTION
selector.
2
Start the selected audio program source.
Note
The surround, equalized, and DDS function do not have any
effect for VIDEO 1 AUDIO OUT jacks.
am.
Video signals
ch.
Audio signals
2,3,6
6
Turntable
system
7
CD player
BE-Velomel-101¢
DAT deck
1 Press EDIT VIDEO to select the playback-side
VCR.
2
10r3
© 1 will appear in the VIDEO EDIT
display area.
2 > 1: for VCR 2
3 & 1: for VCR 3
2 Insert a recorded video tape into the playback-
side VCR and set the VCR to the playback mode.
3 At the point where audio dubbing is to start,
press the pause button on the playback-side VCR.
4 Press EDIT AUDIO.
AUDIO indicator appears.
5 Select the audio program source with FUNCTION
selectors.
6 Release the pause mode of the playback-side VCR
and set VCR 1 to the recording mode.
7 Start the selected audio program source.
Audio dubbing will start.
25

Advertisement

Table of Contents
loading

Table of Contents