Storing The Settings Of Digital Sound Effects; Linking The Sound Field Memory To Preset Stati - Sony STR-D2020 Operating Instructions Manual

Storing the Settings of Digital Sound Effects - Sound Field Memory
Storing the Settings of Digital Sound Effects
You can store up to 10 digital sound effects (combina-
tions of the settings of surround, parametric equalizer,
and digital dynamic sound) you created into the
memory and recal: them.
You can also link these 10 digital sound field effects to
preset stations.
Set the parameters of surround, parametric equaliz-
er, and digital dynamic sound controller.
Press RECALL button (when the unit is in a mode
other than TUNER, skip this step).
Press MEMORY.
ho DhD —
Press the numeric button to be stored (1 to 0).
Calling up the settings of digital sound effects
1 Press PRESET/USER until USER appears in the
display.
2 Select the desired preset number by pressing the
numeric button. To use the numeric buttons in
tuner mode, first press RECALL button.
When you store a new digital sound effect
The digital sound effect for the same user preset num-
ber will be replaced.
Even if the AC power cord is disconnected
The stored data is maintained for approximately 2
weeks.
To reset the unit to initial settings
Press POWER while pressing SURROUND ON/OFF.
If the DRLC/POWER indicator is lit, first press
DRLC/POWER to turn off this indicator.
All of the 10 settings are then restored to the ones
stored at the factory.
Linking the Sound Field Memory to Preset Stations
S. FIELD
LINK ON/OFF
POWER > ON
43,52
Tune in a station to be linked to the sound field
effect.
Press SOUND FIELD PGM SET.
Press USER/PRESET and the numeric buttons (1 to
0) to select the desired sound field effect.
Press MEMORY.
ar QN —
Press the numeric button corresponding to the sta-
tion number to be linked.
Tuning in the preset station stored with the linked
sound field effect
1 Press S FIELD LINK ON/OFF so that SOUND
FIELD LINK ON appears in the display.
2 Select the desired number by pressing the SHIFT
and numeric button.
To change the sound field setting
Press S FIELD LINK ON/OFF to OFF, and then adjust
the sound field effect as you desire.
39