Video Tape Editing; Adding New Sound On A Video Tape During Editing - Sony STR-AV880 Service Manual

ADDING NEW SOUND ON A ee
VIDEO TAPE EDITING - TAPE DURING EDITING
To edit a video tape, connect a VCR for playback to the — During video tape editing, you can replace the sound
VIDEO 2 VIDEO IN/AUDIO IN jacks and a VCR for recording previously recorded on a video tape with the desired sound
to the VIDEO 1 VIDEO OUT/AUDIO OUT jacks. ° from an audio source, thus making your own personalized
video tape.
ma Video signals
= Audio signals
©©@© Sooo ao
IN VIDEO 2 — VIDEO1
VIDEO IN/AUDIO IN VIDEO QUT/AUDIO OUT
@ OD oO es ee
> ) ©©© onaa a
(for playback) (for recording)
CD player .e]
mee | |
Component TV Tape deck i
"
1 Turn on the receiver and equipment to be used. 1 Turn on the receiver and connected equipment.
2 Press the VIDEO 2 key. 2 Press the VIDEO 2 key.
3 Select the front or rear video 2 inputs with the F/R key. 3 Select the front or rear video 2 inputs with the F/R key.
4 Press the EDIT VIDEO key. 4 insert a recorded video tape into the VCR 2 and set it to
playback mode.
5 Set the VCR 2 to playback mode.
5 atthe point where audio dubbing is to start, press the
6 Set the VCR 1 to recording mode. Editing will begin. PAUSE button on the VCR 2.
You can listen to an audio program source during video tape 6 Press the EDIT AUDIO key on the receiver.
editing by pressing any FUNCTION key.
7 Press the desired FUNCTION key.
8 Release the pause mode of the VCR 2 and set the VCR 1
Note
to recording mode.
You cannot edit a video tape from VCR 1 to VCR 2.
9 start playing the selected program source.