Sony BRAVIA KDL-52XBR9 Operating Instructions Manual page 9

[] LAN Connects to an existing network using an Ethernet cable. Be sure to complete
Network Setup
(page 18).
[] DMeX/SERVICE This USB port is only for service unless you are connecting an optional BRAVIA
Link module (DMeX).
[] Thi inpui p o;icanbeu ed composiie video inpuii iDEo ii or omponeni
COMPONENT video input (COMPONENT 1). For composite use, connect the yellow jack to Y for if}
IN 1 (1080p/ video and use audio (L/R) for audio signals. For component connection, use Y, PB,
1080i/720p1 PR for video signals and also connect the audio (L/R) for audio signals. _
480p/480i)/
By default, this TV will automatically detect and switch between VIDEO 1 and
COMPONENT 1. To manually set the input type, press HOME, select Settings,
L-AUDIO-R
then Channels & Inputs, then select Video/Component 1 Selection.
[] COMPONENT Component video provides better picture quality than the S Video and composite o_
IN 2 video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
[] AUDIO OUT Connects to the left and right audio input jacks of your analog audio equipment. You
(VAR/FIX) can use these outputs to listen to your TV's audio through your stereo system.
[] HDMI IN 1/2/3/4 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
L-AUDIO-R digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment with a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to AUDIO (L/R).
[] DIGITAL AUDIO Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
OUT (OPTICAL) Digital compatible.
[] CABLE/ RF input that connects to your cable or over-the-air antenna.
ANTENNA
[] USB Connects to USB equipment to access photo, music, and video files.
[] PC IN Connects to a personal computer's video and audio output connector. Can also be
(RGB/AUDIO) connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD 15-HD 15 cable.
You may need to adjust the TV settings or your PC's resolution and timing (see
page 12).
[] VIDEO IN 2 Connects to the S VIDEO output jack of video equipment. If both composite video
S VIDEO/VIDEO and S VIDEO are connected, S VIDEO signal has priority.
L (MONO)-
If you have mono equipment, connect its audio output port to the TV's L (MONO)
AUDIO-R
audio input port.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
9