Samsung SMX-F40BN User Manual page 30

oreo r on
I I
CONNECTING A POWER SOURCE
• Be sure to charge the battery pack before you start using your camcorder.
• Use the IA-BP210E battery pack only.
• The battery pack may be charged a little at the time of purchase.
| Battery pack insertion/ejection
It is recommended you purchase one or more additional battery packs to allow continuous use
of your camcorder.
i I l[."[,_ il I lit l I l[,_l o_-| | (_ i_11 o_--[I] [I
1. Insert the battery pack into the battery
pack slot until it softly clicks.
• Make sure that the SAMSUNG logo
is facing front when the camcorder is
placed as shown in the figure.
Iliml i / ¸F ¸¸¸%¸¸¸¸¸¸¸¸¸¸¸ F !
i iiiii_i i iii_(
!1,9 [._ili[, aN,[_ _"Xiil{_i,.i o_.[_[I
1. Gently push the Battery pack release
switch in the direction as shown in the
diagram to eject the battery.
2. Push down and lift the battery pack to
pull out in the direction as shown in the
diagram.
il iii
iii
,',u_
18
• Use only Sameung--approved battery packs. Do not use batteries from other manufacturers.
Otherwise, there is a danger of overheating, fire or explosion.
• Sameung is not responsible for problems occurring due to using unapproved batteries.
• Remove the battery pack separately from the camcorder while not in use.
• It is recommended to prepare an additional battery pack for prolonged outdoor use.
• Additional battery packs can be purchased from sameungparts.com.