Samsung SMX-F40BN User Manual page 123

Adjusting the image during recording
i i _ ii i _ iii •
Focus does not
adjust automatically. •
The image appeals •
too bright or flickering,
or changes in color,
Set "Focus" to "Auto." '.-page 57
The recording conditions are not suitable for auto focus.
Adjust the focus manually, '.-page 58
The lens is dusty on the surface. Clear the lens and check the focus.
Recording is being made in a dark place. Increase the brightness in the
place.
This occurs when recording images under a fluorescent lamp, sodium
lamp, or mercury lamp. Cancel "iSCENE" to minimise these phenomena.
'.-page 46
Playback on your camcorder
Pressing the
playback (Play/
Pause) button did
not start playing:
The Skip or Search
function does not
work properly.
Playbackis
interrupted
unexpectedly.
You cannot hear
sound when playing
a Time Lapse
recording.
Photos stored on a
storage media are
not displayed in the
actual size.
• Press the MODE button to set Video Play mode,
• Image files recorded on another camcorder may not play on your
camcorder.
• Check out a memory card compatibility. '-page 32
• If the temperature inside the camcorder is too high, it cannot function
properly,
Turn the camcorder off, wait for a few moments, and turn it on again.
Check if the AC adaptor or battery pack is properly connected and stable.
• The Time Lapse REC function does not support sound. '-page 64
• Photos recorded on other devices may not appear at actual size.
This is not an error.
Playback on other devices (TV, etc.)
You cannot View I • Connect the audio line of the Audio/Video cable jack to your camcorder
the image or hear ii ° and the connected device (TV, DVD recorder, etc). (Red color- right, White
the sound on the color- left)
The Audio/Video cable jack is not connected properly. Make sure that the
connected dev ce, Audio/Video cable jack is connected to the proper jack. '-page 93
111