Table of Contents
Advertisement
Maintenance
If you find something abnormal with the light source, contact your dealer or
service company.
Cleaning the intake vents
It is recommended to check and clean the intake vents periodically for maintaining
the ventilation inside of the projector and normal operation.
If a message prompts you to clean or check the intake vents, or if the TEMP
indicator lights in red, clean the intake vents immediately.
How to clean the intake vents
1.
Turn the projector off and unplug the power cord. Allow the projector to cool
down sufficiently.
2.
Use a vacuum cleaner on and around the intake vents.
WARNING ►Before taking care of the intake vents, make sure the power
cable is not plugged in, then allow the projector to cool sufficiently. Before
taking care of the intake vents, make sure to turn the projector off and to pull
out the power cable, then allow the inside of the projector to cool sufficiently.
If you take care of the projector with the power cord connected, it could cause
a fire or an electrical shock. If you handle the projector in a high temperature
state, it could cause a burn.
NOTE • If the message "CHECK THE AIR FLOW" is displayed, turn the
power off and allow the inside of the projector to cool down.
Maintenance
1 0 3
Advertisement
Table of Contents
