Advertisement
Quick Links
ITEM NUMBERS:
541HTDT401, 541HTDT403
All plumbing and electrical connections must be made by a qualified installer in accordance
with your state and local codes.
STEP 1:
LEVEL DISHWASHER
•
Place dishwasher in its permanent location
and use the leveling feet to ensure the unit is
level and stable.
D
QUICK START GUIDE
STEP 2:
HOT WATER CONNECTION
•
The optimal water temperature is 140°F. For
best results, the water temperature should be
no lower than 125°F.
•
Install the included 5' flexible water hose, filter,
and gasket as shown in Fig. 1.
FIG. 1
To Wall:
Straight side with
filter 3/4" fitting
To Dishwasher:
90° side plus gasket
For hard water supplies with a hardness of
over 3 gpg or 5°fH and pH beyond the range of
6.5–7.5, a water conditioner/descaler must
be installed.
02/2024
Advertisement
Related Manuals for Mainstreet Equipment 541HTDT401
Summary of Contents for Mainstreet Equipment 541HTDT401
- Page 1 QUICK START GUIDE ITEM NUMBERS: 541HTDT401, 541HTDT403 All plumbing and electrical connections must be made by a qualified installer in accordance with your state and local codes. STEP 1: STEP 2: LEVEL DISHWASHER HOT WATER CONNECTION • The optimal water temperature is 140°F. For •...
- Page 2 QUICK START GUIDE STEP 3: STEP 4: DRAIN HOOKUP ELECTRICAL CONNECTION • Open drain connection (1 1/2" minimum IPS) (Fig. 2). • Check amps consumption on data plate to size breaker correctly. • Connect dishwasher to drain using the gray flex drain (Fig.
- Page 3 QUICK START GUIDE STEP 5: STEP 6: CHEMICALS PREPARATION FOR USE • Dishwasher comes standard with built-in Open door and CUT tie wraps from the • adjustable detergent and rinse pumps. wash and rinse arm. DO NOT PULL OFF. • On the back of the dishwasher, locate clear •...