Setting The Speakers - Sony BDV-HZ970W Operating Instructions Manual

6
7
Calibration mic
ii!!i_
Press 'I'/4, to select [OK].
To cancel, select [Cancel].
Press @.
[Auto Calibration] starts.
The system adjusts the speaker settings
automatically.
For proper calibration results, please
remain quiet during the measurement.
• Before [Auto Calibration], make sure that the
surround amplifier turns on and you install the
surround amplifier inthe appropriate location. If
you install the surround amplifier in an improper
location, such as another room, proper
measurement will not be obtained.
• When you use the Wireless Surround Speaker
Kit (WAHT-SBP2, optional) for the surround
back speakers (page 17), install the speakers in
appropriate location and turn the surround
amplifier on. To use the surround back speakers,
set [Surround Back] in [Speaker Settings] to
[Yes] (page 54)
8
9
Confirm the result of [Auto
Calibration].
The conclusions appear on the TV screen.
Press ÷/') to change the page. The first page
shows the distance of the speakers. The
second page shows the level of the
speakers.
m
• If measuremenl fails, l'ollow the message then
retry, [Aulo
Calibration].
Press ,1,14, t o select [OK] or [Cancel],
then press @.
• The measurement is OK.
Disconnect the calibration mic, then select
[OK1. The result is implemented.
• The measurement is not OK.
Follow the message, then select [OK] to
retry.
• While the Auto Calibration function works:
do not turn off the power.
do not press any button.
do not change the volume.
do not change the function.
do not change the disc.
do not insert a disc.
do not disconnect the calibration mic.
Setting the Speakers
[Speaker Settings]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
1
Press HOME.
The home menu appears on the TV screen.
Press ÷/+ to select _ [Setup].
2
3
4
Press '1"14, to select [Audio Settings],
then press @.
Press '1"14, to select [Speaker Settings],
then press @.
The [Speaker Settings ] display appears.
O
"O
¢D
o
:3
53us