Sony BDV-HZ970W Operating Instructions Manual page 13

Front panel
E
E A,R b T_DB_
Rear panel
[]
[]
I/_) (Power)
Turns the surround amplifier on/off.
S-AIR/STAN DBY indicator
You can check the status of wireless
transmission of sunound speaker audio
signals between the main unit and surround
amplifier.
Indicator Status
Turns green. Wireless transmission between
the main unit and the surround
amplifier is established
correctly and the main unit is
transmitting audio signals to
the surround speakers via the
surround amplifier.
Flashes green Wireless transmission between
quickly, the main unit and the surround
amplifier is established
correctly, but audio signals to
the surround speakers are not
being transmitted by the main
unit.
Flashes green Wireless transmission between
slowly, the main unit and the surround
amplifier is not set up
correctly.
Turns red. Wireless transmission between
the main unit and the surround
amplifier is not set up, or either
the surround amplifier or the
whole system is in standby
mode.
Indicator Status
Turns off. The surround amplifier is
turned off.
Flashes orange. The wireless transceiver is not
inserted/not fully inserted/
inserted upside-down into the
wireless transceiver slot.
Flashes red. The surround amplifier's
protection is active.
[] S-AIR ID switch
Selects the S-AIR ID.
[] PAIRING button
Starts pairing.
[] PAIRING indicator
Indicates the pairing status.
[] SURROUND SELECTOR switch
Selects the mode for the surround amplifier.
[] SPEAKERS jacks
[] Wireless transceiver (EZW-RT10) slot
13us