Setting The Speakers - Sony BDV-L600 Operating Instructions Manual

Routing Control
When you perform One-Touch Play on the
connected component, the system turns on and
sets the system's function to "HDMI1" or
"HDMI2" (depending on the HDMI input jack
in use), and your TV's input is automatically set
to the HDMI input to which the system is
connected.
• Make sure that the component is connected to the
system via a High Speed HDMI cable, and the
Control for HDMI function of the connected
component is set to on.
Position Control
This system adjusts the sound level of the right
and left front speakers automatically if your TV
is compatible with the External Device Control
of Position Control function. In this case, other
components connected to the TV are also
adjusted. For details, refer to the operating
instructions of your TV.

Setting the Speakers

[Speaker Settings]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select
3
Press X/x to select [Audio Settings],
then press .
4
Press X/x to select [Speaker Settings],
then press .
The [Speaker Settings] display appears.
5
Press X/x to select the item, then press
.
Check the following settings.
x [Distance]
When you move the speakers, be sure to set the
parameters of the distance (A) from the
listening position to the speakers.
You can set the parameters from 0 to 23 feet (0.0
to 7.0 meters).
The speakers in the illustration correspond to the
following:
[Front Left/Right] 10 ft/3.0 m: Set the front
speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the subwoofer
distance.
• Depending on the input stream, [Distance] may not
• You can change measurement units (feet or meters)
x [Level]
You can adjust the sound level of the speakers.
[Setup].
You can set the parameters from –6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
1Front left speaker (L)
2Front right speaker (R)
3Subwoofer
3
1
be effective.
by pressing the color button (RED).
2
A
47
US