Table of Contents
Advertisement
ASSEMBLY
Assembly requires two people. Set the treadmill In a cleared area and remove all packing materials. Do not
dispose of the packing rnatedals until assembly is completed. Assembly requires the Included allen wre.._
end your own phillips screwdriver
_===(_[).
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Extension
Leg Screw/Handrail
Screw (53)-4
Latch Screw (35)-2
1. Cut the plastic tie from the side of the treadmill.
With the help of a second person, carefully raise the
Uprights (t 1) until the treadmill is in the position shown.
2. Insert one of the Extension Legs (34) into the treadmill
as shown. Note: It may be helpful to tip the Uprights (11)
in the direction shown by the arrow, as you insert the
Extension Leg. Make sure that the Base Pad (40) is on
the indicated side of the Extension Leg. Attach the
Extension Leg with an Extension Leg Screw (53). Be
sure to push on the head of the Extension Leg
Screw while tightening
it.
Next, attach the other Extension Leg (34) in the same
way.
2
5
Advertisement
Table of Contents
