Advertisement
ACCUDUAL
Read the license agreement carefully.
Select Agree if you accept the terms of
the agreement to continue the setup.
The setup program will install StorConn
to
the
default
C:\Program Files\StorConn. To
install to a different location, either
type in the new path or click Change
and select a new location.
Once you have confirmed the setup
location, click Next to continue.
The setup program will add shortcut icons
to the default folder as "StorConn". If
you do not want to use the default
folder, you can either type a new
name, or select an existing folder from
the list.
Once you have confirmed the shortcut icon
location,
click
Installation will commence.
You will be prompted to Click Finish to
complete the setup .
The shortcut icon will be created on
desktop after software installation
completed.
Link RAID box to COM port of host that StorConn installed via RS-232 cable
1. Connecting power cable to RAID box.
2. Connecting 3-pin RS-232 cable to the terminal on the J10 of RAID box as Figure below.
3. Power on the RAID box
| Pin1 to A | Pin2 to B | Pin3 to C |
location
as
Next
to
continue.
ACD-76300/ACD-76301/ACD-76302 RAID BOX
Advertisement
