Use Auto Program - Sony Trinitron KV-27XBR45 Operating Instructions Manual

Additional Information
After trying the methods below, it the prot)Lem persists,
contact your nearest Sony dealer.
No picture (screen not lit), no sound
"_Make sure the power cord is connected
securely.
•,,_ Operate with the buttons on the TV.
Check to see if the TV!VIDEO setting is
correct: when watching TV, set to TV, and
when watching video tapes, set to VIDEO.
Try another channel. It could be station
trouble.
Poor or no picture (screen lit), good sound
-,_Adjust PICTURE in the VIDEO menu.
(page 20)
-'_Adjust BRIGHT in the VIDEO menu.
(page 20)
,,_Check antenn_._/cable connections.
"_Make sure S VIDEO is set to ON in the SET
UP menu, when watching video tapes with
an S video type VCR.
Good picture, no sound
,,,_Press MUTING so that "MUTING"
disappears from the screen. (page 17)
•,,_ Check the MT5 setting in the AUDIO
menu. (page 24)
•"_Make sure SPEAKER is set to ON in the
AUDIO menu. (page 24)
No color
"_Adjust COLOR in the VIDEO menu.
(page 20)
Black and wh!ite programs cannot be seen
in color.
Only snow and noise appear on the screen
•',_Check the (]ABLE setting in the SET UP
menu. (page 15)
Check the antenna/cable connections.
,_ Make sure the channel is broadcasting
programs.
Dotted lines or stripes
•"_Adjust the antenna.
•',_Move the TV away from noise sources such
as cars, neon signs, and hair-dryers.
Double images or ghosts
"_Use a highly directional outdoor antenna
or a cable (when the problem is causecl by
reflections from nearlvy mountains or tall
buildings).
Cannot operate menu
•,,_ If the item you want to choose appears in
black, you cannot select it. Press TV/
VIDEO until a channel number appears.
Cannot receive upper channels (UHF) when
using an antenna
,,,_ Check if CABLE is OFF in the SET UP
menu. (page 15)
"_Use or AUTO PROGRAM to add receivable
channels that are not presently in TV
memory. (page 14)
Cannot receive any channels when using
cable TV
Check if CABLE is ON in the SET UP
menu. (page 15)
Use AUTO PROGRAM to add receiwlble
channels that are not pJ:esently in TV
memory. (page 14)
Remote control does not open'ate
-_Battery could be weak. Replace the battery.
Make sure the TV's power cord is
connected securely 1:owall outlet.
,.,_Set the CABLE BOX/TV selector to TV
when operating yo_Lr TV.
Are fluorescent lights too close to TV?
Move at least 3-4 feet away from TV.
40 I Additional Information