Sony Trinitron KV-27XBR45 Operating Instructions Manual page 15

3
4
Press + 4, or - * to move the cursor (1_) to
CHANNEL ERASE/ADD and press RETURN.
] _ CHANNEL ERASEtADD
lO
_1 _MENU
__"_ Select th_ channel
I Use _jTJ _ Ex i t l aN
Erase and/or add the channel you want:
(1) Press + 4"or - • and press RETURN to select
ERASE or ADD.
EL ERASE A 1
_u
Select the channe
Use _JE _ Exi t M
5
(2) Press CH +/- or 0-9 buttons to select the channel[
you want to erase or add.
Selected channel number
CH
/Se'e,_; _ Ch_x_?_l_J
(3) Press RETURN.
• If you selected ERASE in step (1), "-" appears
beside the channel number, showing that
channel is erased from the preset memory.
• If you selected ADD in step (1), "+" appears
beside the channel number, showing that
channel is added to the preset memory.
To erase and/or add other channels, repeat
step 4.
6 Wlhen you finish, press MENU.
Notes
• If vou erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added.
• Erasing and adding channels is also available for the AUX
inpul.
Setting cable TV on or off
This setting allows you to view either b_'oadcast or cable
signals. The factory setting for cable TV is ON. If you
do not desire to view cable TV, you m_Jst turn it off as
shown below.
You do not have to do this procedure if you execute
AUTO SET UP (page 14). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press • + or • - to move the cursor (1_) to
SET UP and press RETURN.
The SET UP menu appears.
I_SET UP
I
_CHANNEL ERASE!ADD I
CHANNEL CAPTION
CHANNEL GUIDE
VIDEO LABEL
CABLE: ON
AUTO PROGRAM
LANGUAGE:ENGLISH J
_MENU I
Use £_ _ Exil WEJ_ I
3
4
If you are in one of the video modes, the CABLE
lettering will be black on the menu. To display t]he
CABLE lettering you must press TV on the remote
control until a channel number appears on the
screen.
Set CABLE to ON or OFF:
(1) Make sure the cursor (1_) is beside CABLE and
press RETURN.
(2) Press
* + or • - to select ON or OFF and,
(3) press RETURN.
_SET UP
_CHANNEL ERASE/ADD
CHANNEL CA_TION
CHANNEL GUIDE
VIDEO LABE_
CABLE: O:F
l
AUTO PROGRAM I
I LANGUAGE:EHGLISH I
9MENU
I
Use _ _ Exit
Press MENU to return to the normal screen.
Getting Started
15