Table of Contents
Advertisement
Using the built-in
light
Use the Sony X_3D halogen lamp (not supplied). The supplied halogen lamp is not on
the market. Purchase the Sony XB-3D halogen lamp.
Remove the power source before replacing the bulb.
(1) Remove the built-in light unit while pushing the hole under the built-in light
unit using a wire.
(2) Turn the bulb housing
counterclockwise
and detach from the built-in light
unit.
(3) Replace the bulb using a dry cloth.
(4) Attach the bulb housing
turning it clockwise,
then replace the built-in light
unit.
1
2
m
Q.
.=
8
O
=o
• When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to
reduce the risk of fire.
• To prevent possible bum hazard, disconnect the power source before replacing and
do not touch the bulb until the bulb becomes cool enough to handle (for about 30
minutes or more).
Note
To prevent the bulb from being smudged with finger prints, handle it with a dry cloth,
etc, If the bulb is smudged, wipe it completely.
47
Advertisement
Table of Contents
