Self Diagnosis Display; Moisture Condensation - Samsung Hi 8 SCL610 Owner's Instruction Book

Troubleshooting
IENGLISH I
Before contacting a service center, perform the following simple checks. They might save you the time
and expense of an unnecessary call.
Self Diagnosis Display
Display Blinking Inform that,L Action
E::)
E:],
TAPE END
TAPE END
TAPE
TAPE
D.EMG
C.EMG
R.EMG
L.EMG
slow Change it to a charged
one.
Change it to a charged
fast battery.
slow Prepare a new one.
no Change to a new one.
slow Insert a tape.
If you want to record,
slow release the protection.
slow
the battery pack is almost
discharged
the battery pack is fully
discharged.
the tape has almost reached
its end.
the tape reached its end
there is no tape in the camcorder.
the tape is protected
from recording.
the camcorder has some
mechanical fault.
1. Eject the tape.
2. Set to OFF
3. Detach the battery.
4. Reattach the battery.
* Please contact your local
service center if the problem
continues.
moisture condensation
DEW slow has formed in the camcorder, see page 66.