Casio I/O-PB-11 Service Manual page 23

Error Nature of error
Code
24 KB-1 time-out error
25 KB-1 reception error
28 Scale data error
29 Thermal printer board
error
30 Thermal printer paper
out error
64 AUTOPGM or X/Z error
(100)
65 AUTOPGM or X/Z error
(101)
66 AUTOPGM or X/Z error
(102)
67 AUTOPGM or X/Z error
(103)
68 AUTOPGM or X/Z error
(104)
69 AUTOPGM or X/Z error
(105)
6A AUTOPGM or X/Z error
(106)
6B AUTOPGM or X/Z error
(107)
6C AUTOPGM or X/Z error
(108)
77 RAM card error
(119)
78 RAM card error
(120)
79 RAM card error
(121)
7A RAM card error
(122)
7B RAM card error
(123)
7C RAM card error
(124)
7D RAM card error
(125)
7E RAM card error
(126)
7F RAM card error
(127)
NOTE: The number of shown in the () is the operation error code number after code E56- of system error.
Function
code
70 An error occurred during test of KB-1.
70 An error occurred while reading data of KB-1.
71 An error occurred while reading scale data.
36, 37 An error occurred in the thermal printer board.
36, 37 No paper in the thermal printer.
- A different format data is received.
- A different format of compressed data is selected.
- A received compressed data is abnormal.
- A received compressed data is abnormal.
- Auto program code 90/93 is received from different model.
- Auto program code 90 is received from bigger memory ECR.
- Abort.
- A disk error of PC side.
- A communication sequence is abnormal.
- A power failue happened during read or write operation.
- The RAM card door opened during read or write operation.
- RAM card is not installed.
- A ROM card is installed.
- A different RAM card is installed.
- A write operation is performed in the RAM card which has
already some data.
- A read operation is performed in the empty RAM card.
- Write protect switch is on in the RAM card.
- The other error. (Abnormal condition)
— 21 —
Details