A. INDEX Adding / Changing Prices Adding / Changing Department Descriptions Group Link List Adding / Changing Group Descriptions Linking Groups to Departments Programming Time and Date Adding / Changing clerk names Alpha Code Characters Reports 10. Error modes...
1. Adding / Changing Prices TURN Turn key to the PROGRAM position DISPLAY Should show PGM1 ENTER New price (without using decimal point) PRESS Preset item button that you wish to change REPEAT Steps 3 to 4 until finished PRESS Subtotal button to finish TURN Key back to REG1...
2. Adding/Changing Department Descriptions TURN Turn key to the PROGRAM position ENTER PRESS Subtotal key ENTER New description using 4 digit codes (putting decimal point between each set of numbers) up to 12 characters PRESS 00 key PRESS Physical key on keyboard to be changed REPEAT Steps 4 to 6 until all changes have been made...
3. Group Link List This job will print a report showing the current available Group Links. TURN Turn key to the PROGRAM position ENTER PRESS Subtotal ENTER 206 ( for group printout ) PRESS Subtotal key TURN Key back to REG1...
4. Adding/Changing Group Descriptions This job will set up Group Names. TURN Turn key to the PROGRAM position ENTER PRESS Subtotal ENTER 0106 01 = That is the 1st Group 06 = Group PRESS Subtotal key ENTER Group description eg Haircuts using 4 digit codes from the back page, putting a decimal point between each code PRESS...
5. Linking Groups to Department This job will link Departments to Groups TURN Turn key to the PROGRAM position ENTER PRESS Subtotal ENTER 1166 PRESS Subtotal key ENTER the Group code XX (ie to set as linking to group 8, enter the following code 0008) PRESS The department key to be linked...
Page 8
Date Time Programming TURN Turn key to the PROGRAM position DISPLAY Should show PGM1 ENTER Date in the following format:- (for days 1 to 9, be sure to enter them as 01 to 09. Enter months 1 to 9 as 01 to 09) YYMMDD YY = Year MM = Month...
Page 9
7. Add / Change Clerk Name TURN Turn key to the PROGRAM position ENTER PRESS Subtotal button DISPLAY Should show PGM2 ENTER XX07 Where XX stands for the memory number of each clerk. Simple clerk buttons use the same memory number as on the clerk button.
9. Reports Daily READ TURN Key to the X1 position PRESS Cash key Daily READ & RESET TURN Key to the Z1 position PRESS Cash key Monthly READ & RESET TURN Key to the X2/Z2 position PRESS PRESS Cash key...
Error modes Machine has initialised – contact The START Cash Register Doctor MODE Mode switch changed during transaction To clear - turn key round to a position where it no longer beeping and press subtotal CLRK Clerk button has changed during Transaction.