Table of Contents
Advertisement
Setting DAYLIGHT SAVI Gh
Aa
If you live in an area that uses daylight savings time, set
DAYLIGHT SAVING to "YES" or "NO" depending on the
season, before setting the current time. At the next daylight
savings date, you will be abie to automatically adjust al! the
time-related settings (CURRENT TIME, ON/OFF TIMER
and CHANNEL BLOCK) simply by changing the DAYLIGHT
SAVING setting.
When setting DAYLIGHT SAVING:
¢ After the first Sunday in Aprit (spring daylight savings)
Set to "YES" before setting the current time.
Then, on the last Sunday in October (fall daylight
savings), set to "NO."
All the time-related settings automatically move one hour back.
¢ After the last Sunday in October (fall daylight savings)
Set to "NO" before setting the current time.
Then, on the first Sunday in April (spring daylight
savings), set to "YES."
All the time-related settings automatically move one hour ahead.
Remote Commander
Follow these instructions to set DAYLIGHT SAVING to
"YES" or "NO."
Press MENU.
The main menu appears.
>@IPROG PALETTE
BOMODE SET
OTIME
ESSET uP
COENGLISH
ECICONVERGENCE
secect> ectuan€> e217 GED
Press the rocker control up or down until the cursor
points to "TIME."
6 4 | Chapter 3: Using Advanced Fratures
Using Timer-Activated Functions
Click the rocker control.
The time menu appears.
©
PCURRENT TIME SET
ON/OFF TIMER
CHANNEL BLOCK
DAYLIGHT SAVING:NO
MENU
Press the rocker contro! up or down until the cursor
points to "DAYLIGHT SAVING."
Click the rocker control.
The mode display tums red.
Press the rocker contro! up or down to select "YES" or
"NO."
The setting is complete.
7 Click the rocker control.
To return to the previous menu
Press the rocker contro! up or down until the cursor points
to* > MENU."
Then click the rocker control.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen.
Press MENU on the Remote Commander.
Advertisement
Table of Contents
