Presetting TV Channels
By presetting TV channels to the projection TV, you can select channels by pressing CH (CHANNEL) +/-.
(You can select VHF channels 2 — 13 without presetting.)
Presetting all receivable channels automatically
Follow these instructions to preset all the receivable VHF, UHF or cable TV
channels to the projection TV.
Notes
¢ (f the projection TV is in video mode, the "AUTO PROGRAM" display is shaded and
cannot be selected. Press TV/VIDEO to change to TV mode.
¢ Perform auto programming during the day rather than late at night, when some channels
may not be broadcasting.
Set the cable connection on or off (pp. 28 — 29) to select
the type of
channel you want to preset, VHF/UHF or cable TV.
[
f
To preset VHF
To preset
or UHF channels
cable TV channels
Press ANT/AUX to select the type of channel you want to preset, VHF/UHF/
regular cable TV, or pay cable TV connected to the AUX (auxiliary) terminal.
ANT/AUX
|
J |
AUX
3 |
To preset VHF, UHF
To preset pay cable
or ca cable
TV channels
Press MENU.
The main menu appears.
"ne
eerente
GaN
ae
ENGL ISH
PO EOAVERCENCE
seceetG> ecrvan GD 211 RED
3 Press the rocker contro! up or down until the cursor points to "SET UP."
[PROG PALETTE
EEMODE SET
Su E
>EXSET UP
QOENGLISH
EXCONVERGENCE
sersctG> ectumep exit CRED
30 | Chapter 1: Setting Up