DPE-2100
OPERATION
Starting Unit
The attachment will operate when the battery is installed, and
the lock off lever switch (if applicable), and power switch are
engaged. Make sure the product is properly positioned to
prevent loss of control and possible serious injury.
Note: This model has two operating modes: low and high. Use
speed switch to move between low mode (turtle) and high
mode (rabbit). Use power switch to increase RPM speed
within each mode.
1.
Keep movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause loss of
control.
2.
Set speed switch (A) to
desired mode. Move lock off
lever switch (B) forward to
free power switch (C), and
then depress power switch
to increase RPM.
X7508310301
© 12/23 ECHO Incorporated
OPERATION
A
B
C
27